thyristor module pset 180/08-18 i trms = 280 a i tavm = 180 a v rrm = 600-1800v preliminary data sheet features ? ? isolation voltage 3600 v ? planar glass passivated chips ? low forward voltage drop ? leads suitable for pc board soldering ? ul registered, e 148688 applications ? dc motor control ? light and temperature control ? softstart ac motor controller ? solid state switches advantages ? easy to mount with two screws ? space and weight savings ? improved temperature and power cycling capability ? high power density ? small and light weight powersem gmbh, walpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 eco-pac tm 2 ? 2003 powersem reserves the right to change limits, test conditions and dimensions symbol test conditions maximum ratings data according to iec 60747 refer to a single thyristor unless otherwise stated. i tavm t c = 90 c, t vj = 130c; 180 sine 180 a i tsm t vj = 45 c t = 10 ms (50 hz), sine 4500 a v r = 0 t = 8.3 ms (60 hz), sine 4900 a t vj = 125 c t = 10 ms (50 hz), sine 3800 a v r = 0 t = 8.3 ms (60 hz), sine 4200 a i 2 dt t vj = 45 c t = 10 ms (50 hz), sine 101000 a2s v r = 0 t = 8.3 ms (60 hz), sine 99500 a2s t vj = 125 c t = 10 ms (50 hz), sine 72000 a2s v r = 0 t = 8.3 ms (60 hz), sine 73000 a2s (di/dt) cr t vj = 125 c repetitive, i t = 250 a 150 a/s f=50hz, t p =200s v d =2/3v drm i g =0.5 a non repetitive,i t = i tavm 500 a/s di g /dt=0.5a/s (dv/dt) cr t vj = 125 c v d =2/3v drm 1000 v/s r gk = , method 1 (linear voltage rise) p gm t vj = 125 c t p = 30s 10 w i t =i tavm t p =300s 5 w p gavm 0.5 w v rgm 10 v t vj -40... + 130 c t vjm for 10 sec 150 c t stg -40... + 125 c v isol 50/60 hz, rms t = 1 min 3000 v i isol 1 ma t = 1 s 3600 v m d mounting torque (m4) 1.5 - 2.0 nm 14 - 18 lb.in. weight typ. 24 g v rsm v rrm type v dsm v drm (v) (v) 900 800 pset 180/08 1300 1200 pset 180/12 1500 1400 pset 180/14 1700 1600 pset 180/16 1900 1800 pset 180/18 k- 1 2 ace-1 svx- 1 8 e- 3
pset 180 powersem gmbh, walpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 ? 2003 powersem reserves the right to change limits, test conditions and dimensions symbol test conditions characteristic value i d, i r t vj = 125c, v r = v rrm , v d =v drm 10 ma v t i t = 200 a, t vj = 25 c 1.1 v v to for power-loss calculations only 0.75 v r t 1.23 m ? v gt v d =6v t vj = 25c 1.5 v t vj =-40c 1.6 v i gt v d =6v t vj = 25c 300 ma t vj =-40c 400 ma v gd t vj = 125c v d =2/3v drm 0.2 v i gd t vj = 125c v d =2/3v drm 10 ma i l t vj = 25c, t p =10s 450 ma i g =0.5a, di g /dt=0.5a/s i h t vj = 25c, v d =6v, r gk = ? 200 ma t gd t vj = 25c, v d =1/2v drm 2 s i g =0.5a, di g /dt=0.5a/s r thjc per thyristor; dc, max. 0.17 k/w per module, max. 0.09 k/w r thjk per thyristor; sine 180 el, typ. 0.23 k/w per module, typ. 0.12 k/w d s creeping distance on surface 11.2 mm d a creeping distance in air 5.0 mm a max. allowable acceleration 50 m/s2 package style and outline dimensions in mm (1mm = 0.0394?)
|
